Activecare medical Renegade/P24 Owner's Manual download pdf (Page 10)

For service assistance, please call your authorized ActiveCare dealer.

9 Renegade/P24 Owner’s Manual

9. Insert the controller’s square tube into the tube under

the armrest. Tighten the bolt on the underside of the

controller arm tube to hold it in place at the desired

extension.

10. Connect the cable from the wheelchair’s controller

to the connection point in the wheelchair’s cover

shroud.

11. Fully charge the wheelchair’s battery by inserting the

round charger connector into the battery charging terminal

on the front of the wheelchair’s controller and inserting the

3-pronged plug into a standard electrical outlet.

1NOTE: Full charging normally takes 6-8 hours, but can

take as many as 10 hours depending on the batteries’

charge level when starting and the ambient temperature.

12. Ensure that the 115V/230V switch on the product’s

battery charger is set to 115V. If the switch is set to

230V, the wheelchair will not charge properly.

1NOTE: ONLY use the battery charger included with

your power wheelchair. Use of any other charger may

cause damage or injury and voids the product’s

warranty.

115V/230V switch

Product Disassembly

To disassemble your power wheelchair, reverse the preceding procedure, beginning

with Step 10.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

No comments

Activecare medical Renegade/P24 Owner's Manual Page 10