Activecare medical Renegade/P24 Owner's Manual download pdf (Page 11)

For service assistance, please call your authorized ActiveCare dealer.

Renegade/P24 Owner’s Manual 10

Operation

GENERAL INFORMATION

1. Make sure that the motor levers are in engaged mode. (Parallel to the wheels)

2. Once seated on the wheelchair, turn on the power (Press the power button). The battery

gauge will turn on.

3. We suggest the new users and the disabled operate the chair in low speed until

comfortable with the chair and its use.

4. Start to steer, moving the joystick to drive forward, backward, left or right. If you want to

stop the wheelchair, release the joystick—it will automatically return to the center position

to stop the chair.

5. The chair’s speed is automatically reduced by half when the chair is turning.

6. When driving the chair on a slope, push the joystick forward to keep the chair

continuously climbing until you reach the top of the slope. While the chair is climbing a

steep slope, position your body forward to prevent the front wheels from lifting.

7. When driving the chair down a slope, drive slowly and prepare for an emergency stop if

you feel it difficult to control the chair. If the speed increases, release the joystick to slow

down or to stop, then start again at a slower speed.

CONTROLLER

Controller Features

The controller goes into a sleep state after a programmed amount of time with no joystick

movement. Press the POWER button to “wake” the unit.

When traveling in reverse, the controller beeps as a warning to anyone behind the chair.

The controller provides a “Lock” feature to prevent unauthorized use of the chair. To activate,

press and hold down the POWER button for 5 seconds when turning off the chair. When

Joystick

Speed Down Button

Service Indicator

Speed Up Button

Buzzer Button

Power On/Off

Battery Gauge

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

Activecare medical Renegade/P24 Owner's Manual Page 11